View LP156WH3-TLB1_6581613.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 specification for approval 15.6 hd tft lcd title model acer customer *when you obtain standard approval, please use the above model name without suffix lp156wh3 *model tlb1 suffix lg display co., ltd. supplier ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by k. s. kwon / s.manager prepared by reviewed by signature approved by k. s. kwon / s.manager n. j. seong / manager s. s. han / engineer d. j. lee / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 contents 10 signal timing waveforms 3-5 8-9 lvds signal timing specification 3-3 24-26 appendix. enhanced extended display identification data a 22-23 precautions 9 11 7 interface connections 3-2 color input data refernece 3-6 21 designation of lot mark 8-1 21 packing form 8-2 packing 8 20 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 electrical specifications 3 6 electrical charactreistics 3-1 10 signal timing specifications 3-4 12 power sequence 3-7 13-15 optical sfecifications 4 16-18 mechanical characteristics 5 19 reliablity 6 international standards 7 20 safety 7-1 page item no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 record of revisions 0.0 edid ver first draft (preliminary specification) - may 13. 2009 0.0 description page revision date revision no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 1. general description general features hard coating(3h), anti glare treatment of the front polarizer surface treatment 6-bit, 262,144 colors color depth 1366 horiz. by 768 vert. pixels rgb strip arrangement pixel format 200 cd/m 2 (typ.5 point) luminance, white tbd power consumption 420g (max.) weight transmissive mode, normally white display operating mode yes rohs comply 0.252mm 0.252 mm pixel pitch 359.5(h, typ) 217.1(v, typ) 3.8(d,max) [mm] ( with pcb board ) outline dimension 15.6 inches diagonal active screen size the lp156wh3 is a color active matrix liquid crysta l display with an integral light emitting diode (le d) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmis sive type display operating in the normally white mode. this tft-lcd has 15.6 inches diagonally measured active display area with hd resolution(768 vertical by 1366 horizontal pixel array). each pixel is div ided into red, green and blue sub-pixels or dots which are ar ranged in vertical stripes. gray scale or the brigh tness of the sub-pixel color is determined with a 6-bit g ray scale signal for each dot, thus, presenting a p alette of more than 262,144 colors. the lp156wh3 has been designed to apply the interfa ce method that enables low power, high speed, low emi. the lp156wh3 is intended to support applications wh ere thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp156wh3 characteristics provide an excellent flat display for office automation products such as note book pc. control & data power edid signal & power tft-lcd panel (1366 x 768) 768 1 1 1366 cn 1 user connector 40 pin power block edid block gip(gate in panel) source driver circuit led backlight ass y 7leds x 6strings lvds &= timing control block led driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 h st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 -0.3 vcc power input voltage max min parameter notes values symbol note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the specified led current and power consumption are under the vled = 12.0v , 25 , dimming of max luminance whereas white pattern is displayed and fv is the frame frequency. 4. the operation of led driver below minimum dimmin g ratio may cause flickering or reliability issue. 5. this spec. is not effective at 100% dimming rati o as an exception because it has dc level equivalen t to 0hz. in spite of acceptable range as defined, th e pwm frequency should be fixed and stable for more consistent brightness control at any specific level desired. 6. the life time is determined as the time at which brightness of lcd is 50% compare to that of minimum value at table 9. these led backlight has 6 strings on it and the typical current of leds string is b ase on typical current at table 2. note) 1. the specified icc current and power consumption a re under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the f rame frequency. black mosaic 1 ma tbd 2 110 100 90 z lvds lvds impedance k 60 40 20 z pwm pwm impedance 4 % 100 - 12.5 - pwm dimming (duty) ratio ma 1000 - - i led_p led power inrush current 3 w tbd - p led led power consumption v 0.5 - 0 v led_en_l led_en low voltage 6 hrs - - 12,000 life time v 5.3 - 3.0 v led_en_h led_en high voltage v 5.3 - 3.0 v pwm_h pwm high level voltage 3 ma tbd - i led led power input current v 20.0 12.0 7.0 v led led power input voltage ma 1500 - - i cc_p power supply inrush current backlight : ( with led driver) v 0.5 - 0 v pwm_l pwm low level voltage 5 hz 1000 - 200 f pwm pwm frequency ma tbd 1 w tbd p cc power consumption v 3.6 3.3 3.0 v cc power supply input voltage i cc power supply input current logic : parameter symbol max typ min notes unit values the lp156wh3 requires two power inputs. the first logic is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second backlight is the input about led bl.with led driver . www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 3-2. interface connections table 3. module connector pin configuration (cn1) no connection nc 30 led power supply (7v-20v) vled 40 led power supply (7v-20v) vled 39 led power supply (7v-20v) vled 38 no connection (reserved) nc 37 backlight on/off control bl_on 36 pwm for luminance control blim 35 no connection nc 34 led ground vled_gnd 33 led ground vled_gnd 32 no connection nc 20 ground gnd 19 positive lvds differential clock input odd_clkin+ 18 negative lvds differential clock input odd_clkin- 17 ground gnd 16 positive lvds differential data input odd_r in 2+ 15 negative lvds differential data input odd_r in 2- 14 ground gnd 13 positive lvds differential data input odd_r in 1+ 12 negative lvds differential data input odd_r in 1- 11 led ground vled_gnd 31 power supply, 3.3v typ. vcc 2 power supply, 3.3v typ. vcc 3 ddc 3.3v power v eedid 4 no connection nc 5 ddc clock clk eedid 6 ddc data data eedid 7 positive lvds differential data input odd_r in 0+ 9 no connection nc 1 negative lvds differential data input odd_r in 0- 8 ground gnd 10 ground gnd 22 no connection nc 23 no connection nc 24 ground gnd 25 no connection nc 26 no connection nc 27 ground gnd 28 no connection nc 29 notes description symbol pin nc no connection 21 1, interface chips 1.1 lcd : sw, sw0624 (lcd controller) including lvds receiver 1.2 system : thc63lvdf823a or equivalent * pin to pin compatible with lvds 2. connector 2.1 lcd:cabline-vs rece assy, i-pex gt05q-40s-h10, lsm is050-l40b-c10, uju or equivalant 2.2 mating : cabline-vs plug cable assy or equivalent 2.3 connector pin arrangement 1 40 [lcd module rear view] this lcd employs one interface connections, a 40 pi n connector is used for the module electronics inte rface and led driver. the electronics interface connector is a model is05 0-l40b-c1 manufactured by i-pex. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 notes unit max min symbol description 85mhz > fclk 65mhz ps + 400 - 400 t skew lvds clock to data skew margin - - - 65mhz > fclk 25mhz % 3 - f dev maximum deviation of input clock frequency during ssc khz 200 - f mod maximum modulation frequency of input clock during ssc - 1/7 - 600 t clk + 1/7 t skew_eo lvds clock to clock skew margin (even to odd) ps + 600 t skew - v 2.1 0.3 v in lvds input voltage range - v 1.8 0.6 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symb ol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 < clock skew margin between channel > < lvds data format > 3-3-3. data format 1) lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current (nth ) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1)th cycle next (n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 3-4. signal timing specifications table 6. timing table this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications and spe cifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk 768 768 768 t wva width-active 1366 1366 1366 t wha width-active tclk 138 118 72 t hbp horizontal back porch 54 48 8 t hfp horizontal front porch thp 24 24 8 t vbp vertical back porch 4 3 1 t vfp vertical front porch thp 804 800 779 t vp period 8 5 2 t wv width 42 32 23 t wh width tclk 1600 1526 1470 t hp period hsync vsync data enable mhz - 75.1 - f clk frequency dclk note unit max typ min symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 7. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b 5 b 4 b 3 b 2 b 1 b 0 g 5 g 4 g 3 g 2 g 1 g 0 r 5 r 4 r 3 r 2 r 1 r 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 3-7. power sequence note) 1. valid data is data to meet 3-3. lvds signal tim ing specifications 2. please avoid floating state of interface signal at invalid period. 3. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 4. led power must be turn on after power supply for lcd and interface signal are valid. table 6. power sequence table ms - - 10 t 8 ms - - 0 t 9 ms - - 0 t 10 ms - - 200 t 5 ms - - 400 t 4 ms - - 10 t 11 ms 10 - 3 t 7 ms - - 200 t 6 ms 50 - 0 t 3 ms 50 - 0 t 2 ms 10 - 0.5 t 1 max. typ. min. units value parameter 3-7. power sequence t 7 interface signal, v i lvds power supply input vcc 90% 10% 10% 0v 90% t 1 t 2 t 3 t 4 t 5 t 6 0v dimming control signal of led bl pwm 0v (low) t 8 led input voltage vled t 10 led on/off control signal led_en t 11 t 9 valid data 0v valid data 0v (off) 90% 10% www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 4. optical specification fig. 1 optical characteristic measurement equipment and method table 9. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 75.1mhz, i led = 18 ma - 45 - % color gamut 5 viewing angle color coordinates 4 ms 25 16 - tr r + tr d response time tbd by 0.343 0.313 0.283 wx white y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) degree - - 40 q r degree - - 40 q l degree - - 10 q u degree - - 30 q d blue 0.359 0.329 0.299 wy 6 gray scale green red tbd gx tbd gy tbd rx tbd ry 3 1.6 1.4 - d white luminance variation tbd bx max typ min 1 - 500 400 cr contrast ratio 2 cd/m 2 - 200 170 l wh surface luminance, white parameter symbol notes units values lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the un it has been on and stable for approximately 30 min utes in a dark environment at 25 c . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 100 l63 tbd l55 tbd l23 tbd l31 tbd l39 tbd l47 tbd l15 tbd l7 tbd l0 luminance [%] (typ) gray level note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point acro ss the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , l 5 ) 3. the variation in surface luminance , the panel t otal variation ( d white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , l 13 ) d white = minimum(l 1 ,l 2 , l 13 ) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to t he lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 fig. 4 viewing angle normal y eye f q f = 0 , right f = 180 , left f = 270 , down f = 90 , up fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. tr r tr d 100 90 10 0 % optical response white black white : active area a : h/4 mm b : v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 6 7 8 9 10 11 12 13 10mm 10mm fig. 2 luminance www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lp156wh3. in addition the figure s in the next page are detailed mechanical drawing of the lcd. 193.54 mm vertical hard coating(3h), anti glare treatment of the front polarizer surface treatment 420g (max.) weight 196.8 0.5mm vertical 217.1 0.5mm vertical 3.8mm (max) thickness 344.23 mm horizontal active display area 347.5 0.5mm horizontal bezel area 359.5 0.5mm horizontal outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operatin g storage / shipment 7 half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 2ms for all six faces) shock test (non-operating) 6 sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committ ee on radio interference. c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committee for electr otechnical standardization.(cenelec), 1998 ( including a1: 2000 ) a) ul 60950-1:2003, first edition, underwriters lab oratories, inc., standard for safety of information technology equip ment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equip ment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardiza tion(cenelec) european standard for safety of information technol ogy equipment. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 8. packing 8-2. packing form 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. a) package quantity in one box : 20pcs b) box size : 476mm x 370mm x 292mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer du ring the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film witho ut rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer af ter the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 1/3 t e n t a t i v e www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 2/3 t e n t a t i v e www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 26 lp156wh3 liquid crystal display ver. 0.0 may 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 3/3 t e n t a t i v e www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP156WH3-TLB1

	To Download LP156WH3-TLB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .